Maximizing the Shelf Life of AMSOIL Products
Maximizing the Shelf Life of AMSOIL Synthetic Motor Oil
The shelf life of AMSOIL motor oil is a critical consideration when it comes to maintaining your fleet or ensuring optimal engine performance for your vehicles, AMSOIL synthetic lubricants are renowned for their durability and longevity, but understanding how to maximize their shelf life is essential for ensuring peak performance over time.
What is the Shelf Life of AMSOIL Synthetic Motor Oil?
AMSOIL synthetic motor oil boasts a shelf life of up to five years when stored under optimal conditions. However, several factors can influence the longevity of the product, including environmental and chemical contamination, as well as storage temperature.
Key Takeaways:
- Shelf life of AMSOIL motor oil: Up to five years.
- Factors influencing shelf life: Product design, environmental and chemical contamination, storage temperature.
- Storage guidelines: Store in original containers in a clean, dry, moderately temperate area, away from solvents and cleaning agents.
- Best practices for outdoor storage: Protect containers from elements, keep off the ground, store horizontally for drum-packaged lubricants.
- FIFO method: Use first-in/first-out method to ensure oldest inventory is used first.
Maximizing Motor Oil Shelf Life
Proper storage is paramount to extending the shelf life of AMSOIL synthetic motor oil. Here's how to ensure your lubricants remain fresh and effective:
1. Store in Original Containers
Always store AMSOIL products in their original containers. This helps maintain product integrity and prevents contamination.
2. Choose a Suitable Storage Area
Opt for a clean, dry, and moderately temperate storage area. Avoid locations with exposure to solvents, cleaning agents, or extreme temperature fluctuations.
3. Indoor Storage Best Practices
If possible, store lubricants indoors to protect them from environmental contamination and temperature variations. If outdoor storage is necessary, take precautions to shield containers from the elements.
4. Utilize First-In/First-Out Method
Implement the first-in/first-out (FIFO) method to manage inventory effectively. This ensures that older products are used before newer ones, minimizing the risk of extended storage.
Contact us for expert guidance on product selection and storage solutions tailored to your needs.
Ensure the longevity and effectiveness of your AMSOIL lubricants by implementing proper storage practices today. Your fleet deserves nothing less than the best, and AMSOIL delivers unmatched quality and performance.
Factors Affecting Shelf Life
Contamination:
Water intrusion and the introduction of foreign materials such as cleaning agents and solvents can degrade lubricants, leading to diminished performance.
Temperature:
Maintain storage temperatures between 32°F (0°C) and 85°F (29°C) to prevent water migration, additive separation, and degradation of additives over time.
Aerosol Storage Recommendations
General Guidelines:
- Avoid exposure to direct sunlight or heat, as aerosol cans may burst under high temperatures.
- Store aerosols away from heat sources, flames, sparks, hot surfaces, or battery terminals.
- Do not puncture or incinerate aerosol cans.
- Ensure storage in a cool, dry, and well-ventilated area.
Cold-Temperature Storage:
While most aerosols tolerate cold temperatures, it's advisable to allow them to warm to room temperature before use. However, Miracle Wash should be stored above 32ºF (0ºC) to maintain effectiveness.
By adhering to these storage guidelines and best practices, you can maximize the shelf life of AMSOIL synthetic motor oil and ensure consistent performance for your vehicles and equipment.
